TECHNICAL LIBRARY / CONTROL

Board & drive tables

Product inputs, outputs, connections and variant information.

Serial board connections

Serial board technical data
SectionItem / terminalData / description
MechanicalDimensions, all terminals fitted (W × L × H)157mm × 216mm × 30mm
Dimensions, terminals removed (W × L × H)140mm × 216mm × 16mm
Operating temperature0 - 55°C
Weight446 gr.
SupplyNormal operating voltage24VDC (18 - 30VDC)
Power failure12V 1.2Ah battery; external battery charging
Power consumptionStandby, 24V input1,4W
Maximum, 24V input10,8W; battery charging, programmable inputs/outputs and all call inputs active
Display outputsGray / inverted Gray; binary / inverted binary22mA output current at 24V
7-segment, common-anode display30mA segment current; short-circuit protected
31,32,02; normal and inverted30mA output current; short-circuit protected
InputsAssignable terminal inputs (3)PI1 / PI2 / PI3
Inspection movement buttons500 / 501
QUADSENSE inputLS
Lower / upper forced-limit magnetic switches817 / 818
Door open / close buttonsK20 / DTS
Fan inputFAN
Photocell sensor inputFSL
Door open / close limitsK16 / K19
Overload / full-load inputs804 / 805
Current for each input at 24VDC6,2mA
Programmable relay outputsAssignable relay outputs (3)PR1 / PR2 / PR3
Contact switching rating3A 250VAC / 3A 30VDC
Calls16 callsInputs active with (-); LED outputs short-circuit protected
Car outputsCar lamp / car fan220VAC; fuse protected (3A)
Emergency lighting12V (max.200mA)
Alarm buttonActive with 0VDC (1000)
Gong output8R/0.5W speaker
Buzzer output8R/0.5W speaker
Magnetic-switch supply outputMLO (max.200mA); continuous battery-backed output during a power failure
Load-cell connectionVoltage inputAV-AR (0-10V)
Current inputAI-AR (4-20mA)
Original catalogue table

Panel equipment

Panel equipment
SectionItem / terminalData / description
SupplySupply voltage24VDC (20-28VDC)
Encoder, built-in cardENCI, asynchronousHTL or TTL; 500 - 4096 pulses; incremental
ENCA, synchronousENDAT / SINCOS / BISS / REZA encoder protocols supported
Serial communicationLanding fixturesConnect to the CANBUS socket board
Car fixtureConnect to the SERIAL_BOARD
Car doorSerial communication with the MITRON COMFORT CANBUS door board
Relay outputsRA,RC1 relay output
Signal inputsDRIVER24VDC, 3mA; 6 inputs, 1 output; assignable terminals
MAIN_BOARD24VDC, 3mA; 4 inputs, 1 output; assignable terminals
SERIAL_BOARD24VDC, 3mA; 3 inputs, 3 outputs; assignable terminals. Floor-level magnetic switches: ML1,ML2
PTCMotor PTCT1 and T2 inputs on MAIN_BOARD. If only the motor PTC is connected, T3 and T4 must be bridged
Machine-room PTCT3 and T4 inputs on MAIN_BOARD
Braking-resistor PTCT3 and T4 inputs on MAIN_BOARD
Door bridgingDoor-bridging circuitLocated on the board
CoolingPanel coolingX2 fans; aluminium heat sink; ventilation at the bottom and top of the enclosure
ContactorSupply42 VAC
Safety circuitSupply42 VAC
Software updateAVIREX KEYPADSoftware updates using the AVIREX KEYPAD product
Original catalogue table

Drive technical tables

Drive technical data
Specification7.5 kW11 kW15 kW
Asynchronous modelAVRXAS18A-1AVRXAS26A-2AVRXAS35A-3
Synchronous modelAVRXSN18A-1AVRXSN26A-2AVRXSN35A-3
Nominal output current (Inom)18A26A35A
Maximum output current27A39A52,5A
Braking resistor (BR-,BR+)50Ω 1500W40Ω 2000W33Ω 3000W

Common drive specifications

Common drive specifications
SpecificationData
TypeAVIREX COMPACT FX
Input (L1,L2,L3)AC 3-phase, 340V-440V, 50/60 Hz
Output (U,V,W)AC 3-phase, 0V-400V, 0-300 Hz
Internal EMC filtersNo internal EMC filter
Remote accessWi-Fi module (2.4 GHz)
User interfaceLCD display; 2 lines, 16 characters
Rescue input (ES1,ES2)220VAC single-phase mains input
Original catalogue table
WhatsApp
GENALIFT / HRM

Compare Series

Compare Series
SYSTEM / SERIES

Selected configurations are shown. Dimensions, equipment, compatibility and documentation requirements are confirmed for each project at the quotation stage.

GENALIFT / CONTACT

PRODUCT INFORMATION & QUOTATION

Product enquiry

Prepare your enquiry and send it through your email application.

Complete sending in your own email application. This form does not store information on a server.

gokturk@genalift.com ↗